Bicycle THICK Axle Washer 3/8"- STAINLESS STEEL (EACH)

3/8" axle washer. EXTRA THICK! (1/8" thick) For 3/8" axles Outer diameter: 7/8" Material: 18-8 STAINLESS STEEL SOLD INDIVIDUALLY

3/8" axle retainer safety washer for DEPARTMENT STORE BICYCLES forks (PAIR)

3/8" axle retainer safety washer for DEPARTMENT STORE BIKES (PAIR) If your fork has a square hole above the axle drop out, then this is most likely the safety washer it uses. SOLD IN PAIRS

3/8" axle retainer safety washer for GT Dyno Robinson Haro forks (PAIR)

3/8" axle retainer safety washer for GT, Dyno, Robinson and other forks (PAIR) Most mid-school GT/Dyno/Robinson forks require this type of washer for you to be able to install the front wheel. These may also fit other bikes, so the exact dimensions...

Alloy BMX acorn axle nut 3/8" X 26T (SET OF 4) BRIGHT DIP BLUE

Aluminum acorn axle nuts. Color: BRIGHT DIP BLUE ANODIZED (this is bright dip anodizing, which is on the turquoise end of the blue spectrum- the 2nd photo show the difference between bright dip blue and regular blue) Size: 3/8" X 26T SET OF 4 - no...

Aluminum alloy BMX acorn axle nut 3/8" X 26T (SET OF 4) BLACK

Black aluminum acorn axle nuts. Size: 3/8" X 26T SET OF 4 - no retail packaging. Brand new, never mounted. These will work as axle nuts for show bikes - BUT, it is recommended for safety that these be run outboard of regular steel axle nuts if you...

BMX Bicycle Axle Washer 14mm - BLACK (EACH)

Washer for 14mm bicycle axles Color: BLACK Inner diameter: 15mm Outer diameter: 25.4mm (1") Thickeness: 2mm Material: STEEL SOLD INDIVIDUALLY

BMX Bicycle Axle Washer 14mm - SILVER (EACH)

Washer for 14mm bicycle axles Color: SILVER Inner diameter: 15mm Outer diameter: 25.4mm (1") Thickeness: 2mm Material: STEEL SOLD INDIVIDUALLY

BMX bicycle flanged axle nuts 14mm (M14 X 1.0) - PAIR - CHROME

Set of 2 axle nuts (PAIR) for 14mm axles. Color: SILVER Size: M14 x 1.0 Uses 19mm wrench, height (thickness) is 15.6mm. Flange diameter is approx. 26mm. Brand new, never installed. I buy them in bulk so no retail packaging is included (you get them...

Flanged BMX bicycle axle nut 3/8" X 24T - SET OF 4 - SILVER

Flanged axle nuts - brand new, never mounted. SOLD IN SETS OF 4. The "height" of this nut is 11mm (7/16"). Threading: 3/8" X 24T (fits most rear Skyway mags (coaster or freewheel) and most Coaster brake 3/8" rear wheels)

FRONT Bicycle BMX CR-MO chromoly hub axle - 3/8" X 26T X 135mm with 5/16" FLATS (EACH) YELLOW ZINC (GOLD)

Bicycle hub axle for front BMX hubs. Features 5/16" flat sections for forks with "safety washer" provision. Color: GOLD (YELLOW ZINC finish) Dimensions: 135mm overall length (each threaded section is 51mm, center unthreaded part is 33mm) 5/16" flats...

KT Hi-Stop Bicycle Coaster Brake 305 Hub Trim Kit 22T cog plus hardware

Brand new trim kit of KT Hi-Stop KT305 hubs. Although brand new, note the vintage KT logo used on the cog. Also, the strap is stamped KT using their oval logo. This kit is at home on old school or new bikes. This kit will fit many coaster brake hubs...

Porkchop BMX 3/8" X 26T bicycle axle collars for sealed bearing hubs (PAIR) BLACK

3/8" X 26T bicycle axle lock collar for sealed bearing hubs (such as old school Superlace) Color: BLACK ANODIZED These are high quality, CNC machined from aluminum alloy, axle collars.  Size: 3/8" X 26T Dimensions: 9.7mm thick (3/8"), 22.7mm...

Porkchop BMX 3/8" X 26T bicycle axle collars for sealed bearing hubs (PAIR) DARK BLUE

3/8" X 26T bicycle axle lock collar for sealed bearing hubs (such as old school Superlace) Color: BLUE ANODIZED These are high quality, CNC machined from aluminum alloy, axle collars.  Size: 3/8" X 26T Dimensions: 9.7mm thick (3/8"), 22.7mm...

Porkchop BMX 3/8" X 26T bicycle axle collars for sealed bearing hubs (PAIR) GOLD

3/8" X 26T bicycle axle lock collar for sealed bearing hubs (such as old school Superlace) Color: GOLD ANODIZED These are high quality, CNC machined from aluminum alloy, axle collars.  Size: 3/8" X 26T Dimensions: 9.7mm thick (3/8"), 22.7mm...

Porkchop BMX 3/8" X 26T bicycle axle collars for sealed bearing hubs (PAIR) RED

3/8" X 26T bicycle axle lock collar for sealed bearing hubs (such as old school Superlace) Color: RED ANODIZED These are high quality, CNC machined from aluminum alloy, axle collars.  Size: 3/8" X 26T Dimensions: 9.7mm thick (3/8"), 22.7mm...

Porkchop BMX 3/8" X 26T bicycle axle collars for sealed bearing hubs (PAIR) SILVER

3/8" X 26T bicycle axle lock collar for sealed bearing hubs (such as old school Superlace) Color: SILVER ANODIZED These are high quality, CNC machined from aluminum alloy, axle collars.  Size: 3/8" X 26T Dimensions: 9.7mm thick (3/8"), 22.7mm...

Porkchop BMX ALUMINUM Bicycle Axle Washers for 3/8" axles - BLACK (SET OF 4)

ALUMINUM bicycle axle washers for 3/8" axles "PC" logo laser engraved on one side (can be installed with either side facing out). Color: BLACK ANODIZED Inner diameter: Fits 3/8" axles Outer diameter: 25.4mm (1") Thickness: 2.5mm (1/10") Material:...

Porkchop BMX ALUMINUM Bicycle Axle Washers for 3/8" axles - BRIGHT BLUE (SET OF 4)

ALUMINUM bicycle axle washers for 3/8" axles "PC" logo laser engraved on one side (can be installed with either side facing out). Color: BRIGHT BLUE ANODIZED Inner diameter: Fits 3/8" axles Outer diameter: 25.4mm (1") Thickness: 2.5mm...

Porkchop BMX ALUMINUM Bicycle Axle Washers for 3/8" axles - DARK BLUE (SET OF 4)

ALUMINUM bicycle axle washers for 3/8" axles "PC" logo laser engraved on one side (can be installed with either side facing out). Color: DARK BLUE ANODIZED Inner diameter: Fits 3/8" axles Outer diameter: 25.4mm (1") Thickness: 2.5mm...

Porkchop BMX ALUMINUM Bicycle Axle Washers for 3/8" axles - GOLD (SET OF 4)

ALUMINUM bicycle axle washers for 3/8" axles "PC" logo laser engraved on one side (can be installed with either side facing out). Color: GOLD ANODIZED Inner diameter: Fits 3/8" axles Outer diameter: 25.4mm (1") Thickness: 2.5mm (1/10") Material:...

Porkchop BMX ALUMINUM Bicycle Axle Washers for 3/8" axles - GREEN (SET OF 4)

ALUMINUM bicycle axle washers for 3/8" axles "PC" logo laser engraved on one side (can be installed with either side facing out). Color: GREEN ANODIZED Inner diameter: Fits 3/8" axles Outer diameter: 25.4mm (1") Thickness: 2.5mm (1/10") Material:...

Porkchop BMX ALUMINUM Bicycle Axle Washers for 3/8" axles - PURPLE (SET OF 4)

ALUMINUM bicycle axle washers for 3/8" axles "PC" logo laser engraved on one side (can be installed with either side facing out). Color: PURPLE ANODIZED Inner diameter: Fits 3/8" axles Outer diameter: 25.4mm (1") Thickness: 2.5mm...

Porkchop BMX ALUMINUM Bicycle Axle Washers for 3/8" axles - SILVER (SET OF 4)

ALUMINUM bicycle axle washers for 3/8" axles "PC" logo laser engraved on one side (can be installed with either side facing out). Color: SILVER ANODIZED Inner diameter: Fits 3/8" axles Outer diameter: 25.4mm (1") Thickness: 2.5mm...

Porkchop BMX CR-MO chromoly hollow bicycle axle set for Superlace wheels - 3/8" X 26T - FRONT & REAR SET - BLACK COLLARS

Axle set from Porkchop BMX for old school BMX GT Superlace sealed bearing hubs (and others) Includes: Front 3/8" x 26T hollow chromoly axle (with 5/16" flats) - 132mm long Rear 3/8" X 26T hollow chromoly axle - 156mm long 4x (four) aluminum locking...

Porkchop BMX CR-MO chromoly hollow bicycle axle set for Superlace wheels - 3/8" X 26T - FRONT & REAR SET - DARK BLUE COLLARS

Axle set from Porkchop BMX for old school BMX GT Superlace sealed bearing hubs (and others) Includes: Front 3/8" x 26T hollow chromoly axle (with 5/16" flats) - 132mm long Rear 3/8" X 26T hollow chromoly axle - 156mm long 4x (four) aluminum locking...

Porkchop BMX CR-MO chromoly hollow bicycle axle set for Superlace wheels - 3/8" X 26T - FRONT & REAR SET - GOLD COLLARS

Axle set from Porkchop BMX for old school BMX GT Superlace sealed bearing hubs (and others) Includes: Front 3/8" x 26T hollow chromoly axle (with 5/16" flats) - 132mm long Rear 3/8" X 26T hollow chromoly axle - 156mm long 4x (four) aluminum locking...

Porkchop BMX CR-MO chromoly hollow bicycle axle set for Superlace wheels - 3/8" X 26T - FRONT & REAR SET - RED COLLARS

Axle set from Porkchop BMX for old school BMX GT Superlace sealed bearing hubs (and others) Includes: Front 3/8" x 26T hollow chromoly axle (with 5/16" flats) - 132mm long Rear 3/8" X 26T hollow chromoly axle - 156mm long 4x (four) aluminum locking...

Porkchop BMX CR-MO chromoly hollow bicycle axle set for Superlace wheels - 3/8" X 26T - FRONT & REAR SET - SILVER COLLARS

Axle set from Porkchop BMX for old school BMX GT Superlace sealed bearing hubs (and others) Includes: Front 3/8" x 26T hollow chromoly axle (with 5/16" flats) - 132mm long Rear 3/8" X 26T hollow chromoly axle - 156mm long 4x (four) aluminum locking...

Porkchop BMX FRONT Bicycle CR-MO chromoly hollow hub axle for sealed bearing - 3/8" X 26T (w/ 5/16" flats), 132mm long - SILVER

Bicycle hub axle for FRONT BMX sealed bearing hubs (such as Superlace, Racelace, tc. from the 1980's) Color: SILVER Dimensions: 132mm overall length - 61.4mm center section (inside of bearing to inside of bearing). Bearing seat is 3/8" (these are...

Porkchop BMX REAR Bicycle CR-MO chromoly hollow hub axle for sealed bearing - 3/8" X 26T , 156mm long- SILVER

Bicycle hub axle for REAR BMX sealed bearing hubs (such as Superlace, Racelace, etc. and other hubs from the 1980's). Color: SILVER Dimensions: 156mm overall length - 79mm center section (inside edge of bearing to inside edge of bearing). Bearing...

REAR Bicycle BMX hub axle - 3/8" X 24T X 150mm (EACH) YELLOW ZINC (GOLD)

Bicycle hub axle for REAR BMX hubs. These are some "unknown" axles I received in a large parts lot a few years ago. Color: GOLD (YELLOW ZINC finish) Dimensions: 150mm overall length (each threaded section is 56mm, center unthreaded part is...

REAR Bicycle BMX CR-MO chromoly hub axle - 3/8" X (24T or 26T) X 150mm (EACH) YELLOW ZINC (GOLD)

Bicycle hub axle for REAR BMX hubs. Color: GOLD (YELLOW ZINC finish) Dimensions: 150mm overall length (each threaded section is 58mm, center unthreaded part is 34mm) Threading: 3/8" with your choice of 26T (usually freewheel) or 24T (usually coaster...

Suzue bicycle hub axle bearing dust cover (PAIR) - CHROME - Made in Japan

Dust covers made for loose ball Suzue Promax track hubs. These may work on other hubs and detailed measurements are provided below for you to determine if they will work with yours. Outer diameter: 27.3mm Inner diameter: 12.0mm Thickness (raised...

Ultralight BMX bicycle axle nut 3/8" X 24T - SET OF 4 - SILVER - TITANIUM

Bicycle axle nuts SOLD IN SETS OF 4 Threading: 3/8" X 24T (fits many coaster brake 3/8" rear wheels as well as some Skyway mag wheels) Color: NATURAL Material: TITANIUM  Grade 5 (6AL-4V) Weight: 9 grams per nut (36 grams per set of 4...

Ultralight BMX bicycle axle nut 3/8" X 26T - SET OF 4 - BLACK - TITANIUM

Bicycle axle nuts SOLD IN SETS OF 4 Threading: 3/8" X 26T (fits most freewheel era 3/8" rear wheels as well as most 3/8" front wheels) Color: BLACK (PVD treatment) Material: TITANIUM  Grade 5 (6AL-4V) Weight: 9 grams per nut (36 grams...

Ultralight BMX bicycle axle nut 3/8" X 26T - SET OF 4 - SILVER - TITANIUM

Bicycle axle nuts SOLD IN SETS OF 4 Threading: 3/8" X 26T (fits most freewheel era 3/8" rear wheels as well as most 3/8" front wheels) Color: NATURAL Material: TITANIUM  Grade 5 (6AL-4V) Weight: 9 grams per nut (36 grams per set of 4...

WALD 318 Serrated Bicycle Axle Washer 3/8"

Wald model 318 serrated axle washer. For 3/8" axles Made in the USA. SOLD INDIVIDUALLY