Assortment of tools for BMX and other bicycle types.
ACS BMX (single speed) PAWS Freewheel Removal Tool
4 prong mating, which is the most common freewheel interface (but always check yours first... there are several different types depending on brand and age of the freewheel).
Typically if your...
Bikehand professional chain tool
Works on all chains including 1/8”, 3/32” single-speed chains and 5 to 11-speed derailleur chains. Made from investment cast steel.
Includes extra replacement pin
Cycle chain breaker tool made by the British company Cyclo/Weld-tite. All metal, heavy duty construction. This is one of the best "home mechanic" bicycle chain tools made.
Fits single speed chains as well as multi-speed from 5-9 rear gears.
Finish Line "DRY LUBE" chain lubricant
Goes on wet and sets up with a dry, wax-like synthetic film
Teflon fluoropolymer minimizes pedaling friction and repels moisture
Withstands rides of up to 100 miles
An extremely versatile lubricant
Hozan Tool Industrial Company, Limited of Japan
Spring returned bicycle brake cable cutters, professional quality.
Capacity: Up to 5.0mm wire and up to 14 gauge spokes
MADE IN JAPAN.
MKS wrench to remove/install the dust caps on their Sylvan, BM-7 and other pedals.
The right tool for the job - don't mar the bodies or caps of your expensive pedals using pliers or channel locks.
MADE IN JAPAN.
MKS pedal wrench - stamped steel.
Open end 15mm for installation/removal of pedals on one end, 8mm box end on the other (typically for toe clip hardware but in the BMX world, some brake cable anchor bolts are this size).
Wrench is 163mm long.
Bicycle tire levers
Made of fiber reinforced nylon, nests together for storage.
Length: 4 1/2"
SOLD IN 3 PACKS (as shown)
NOTE: These are purchased in bulk so no retail packaging is included.
The Park Tool Fold-Up Hex Wrench Set combines all the popular hex wrench sizes into one convenient fold-up tool, eliminating the need for a mess of loose tools. Its multi-position composite handle is comfortable, lightweight, slip-resistant, and 40%...
Park BBT-9 External Bearing Bottom Bracket Tool
The BBT-9 is used to remove and install external bearing crankset bottom brackets. One end of the BBT-9 securely engages the 16 notches of the bottom bracket cups. The other end of the tool engages the 8...
Small, nickel plated wrench can be used on brakes, derailleurs, etc. The CBW wrenches are nominally 1/8" (3.2mm) thick. These two sizes are the most common for old school BMX brakes (10mm for the pivot bolt/nut and 8mm for the cable anchor bolt)
Park CC-3.2 Bicycle Chain Wear Indicator
A worn chain shifts poorly and wears sprockets at an accelerated rate. The CC-3.2 is a “go-no go” gauge designed to accurately indicate when a chain reaches .5% and .75%, the points at which...
Park CCP-22 Crank Arm Puller
This is Park's recent replacement to the CCP-2 and has a stronger, smoother operating rotating tip system. If you're hunting for a CCP-2, this is the puller you're now looking for.
From the package: "The standard of the...
The CDG-2 easily and accurately measures bolt circle diameter (BCD) in millimeters for a wide variety of four- and five-bolt chainring patterns. Made of anodized aluminum and permanently laser engraved, the tool centers itself in chainring holes,...
Park CN-10 cable / housing cutter and crimper
Park says: The CN-10 Cable and Housing Cutter is a shop quality cutter designed specifically for use on all bicycle cables and housing, including hard-to-cut index housing. The CN-10 has cold forged, heat...
Park CNW-2 chainring bolt wrench
This tool is an absolute must for chainring installation. Too many people try to hold the back of the bolt with their finger which seldom gets the bolt tight enough - a folded chainring and serious injuries are the...
Park CT-3.3 Chain Tool
Replaceable driving pin
Investment cast steel body
Adjustable locating shelf
A professional quality shop chain tool that works on 5-speed to 12-speed road and mountain...
Park CTP Chain Tool Replacement Pin
These pins fit Park Tool's CT-1, CT-2, CT-3, CT-5 and CT-7 Chain Tools. Made from hardened alloy tool steel.
NOTE: Use a thread locker when installing the CTP, such as Loctite. Occasionally re-tighten the CTP in...
The universal design of the CWP-7 has a rotating tip pressed into each end of the tool (11.3mm and 16.3mm) so it will remove both square taper and splined (ISIS Drive™, Octalink®) crank arms.
Also fits BNI cranks on Bosch® e-bikes...
Park FR-6 BMX (single speed) Freewheel Removal Tool
4 prong mating, which is the most common freewheel interface (but always check yours first... there are several different types depending on brand and age of the freewheel). Typically if your...
Park FR-8 Freewheel Removal Tool
From Park: Removes four-notch freewheels from "flip-flop" BMX hubs with 30 x 1mm threads. One-inch base to fit end of SR-1, FRW-1, adjustable wrench or bench vise.
From Porkchop: This would be for a freewheel on the...
Park's high performance grease for extreme conditions.
Superior adherence and extended lubrication life
Extreme temperature range: -20°F to 540°F (-29°C to 282°C)
Highly water resistant
Perfect for high end applications including...
Strong, compact, and lightweight, the IB-2 is a great tool for taking on the road or trail. The IB-2 features our unique I-Beam handle with 10 tools.
1.5, 2, 2.5, 3, 4, 5, 6, and 8mm hex wrenches
T25 Torx® compatible driver
Side pull brake not centering? This offset flat wrench is your solution. It allows you to adjust at the base of the pivot bolt.
Part #: OBW-4
Includes 4 sizes: 10mm, 11mm, 12mm, and 13mm
Park Tool's polyurea lubricant was developed specifically for bicycle maintenance and repair. PolyLube 1000™ has an extremely high shear strength to protect vital parts under extreme conditions. PolyLube 1000™ also repels moisture and is...
Park PW-3 pedal wrench. One side of the head is 15mm (nearly every pedal out there) and the other is 9/16" (not so common).
From Porkchop: This is one of my favorite tools in my toolbox - I was a skeptic of pedal wrenches and didn't own one for many...
Park precision spoke nipple wrench. This is the genuine professional version of the spoke wrench that everyone else copies.
Color coded to distinguish size at a glance. Rubber coated and ergonomically shaped for comfort. Precision sizing, hardened and...
Park SW-7 Triple Spoke Wrench
The precision sized SW-7 fits the three most popular spoke nipple sizes on the market. Nickel plated for years of service. Designed for the home mechanic.
Fits the following size spoke nipples:
Park TL-6.2 STEEL CORE bicycle tire levers
The TL-6.2 is a composite covered, steel core tire lever that provides smooth, scratch-free operation and superior strength to help remove even the tightest tires.
Newly upgraded with a tougher, more...
A new chain lube from Park Tool, the leader in bicycle maintenance products. Using PTFE and a proprietary blend of oils, Park Tool Chain Lube works great in wet or dry conditions.
Penetrates, reduces friction, prolongs component life, displaces...
Park VP-1 Vulcanizing Bicycle Tube Patch Kit
The VP-1 Patch Kit includes six thin and flexible patches with tapered edges to blend with the tube’s profile. Each kit is packaged in a small plastic box with sandpaper for cleaning the tube...
Pedro's Crank Arm Puller for square taper spindle cranks
* Fits most square hole cranks (22mm X 1 threading)
* Some brands this will work with: Redline, Takagi, Shimano, Crupi, Sugino, etc.
* Just like a freewheel remover, this is one tool there IS...
Phil Wood Tenacious Oil
For ultimate protection and durability for components that have movement with metal-to-metal contact. It clings tenaciously, allowing smooth durable movement. The base oil has been produced for Phil Wood by the same independent...
Phil Wood Waterproof Grease
Phil Wood Waterproof Grease is used to pack all Phil Spec’d bearings for maximum durability and now you can use it on all of your bikes too. It is tested and has achieved the “premium” lubricant...
Presta to Schrader tube valve pump adapter
Great to keep one in your toolbox or run two on your Presta tubes at all times to be sure you can inflate regardless of pump type you have.