Uni "Butt Hanger" aluminum alloy layback seat post - NOS (New-Old Stock) from the 1980's. Roger Berg, founder, and still owner of Uni to this day, has always been an innovator and these Butt Hanger seat posts were no exception. Double walled aluminum with a plastic support, he always brought something new to the sport.
- Color: BLACK
- Material: Aluminum alloy (double walled - a 2nd aluminum tube is inserted into the first before the post was bent and the plastic Beam'r installed).
- Size: 22.2mm (7/8")
- Length/height: Marked 18".... tubing length is about 18 1/2", but measured vertically (like from a table) to the very top it is 16". Minimum insertion is 4" so theoretically maximum seat height is 12".
- Brand new, never mounted - old stock purchased in bulk directly from Uni so no retail packaging.
- Uni specifies 150lb rider maximum.
- MADE IN USA
These are NOS (New-Old Stock) meaning they are new, never used but old inventory (about 30 years old). They are all individually bagged but may have some small scratches/nicks, especially on the printing (which when mounted is inside the frame). We have more than one for sale so the one in the picture is representative, it is not the actual post you will receive. However, we chose one in "poor" condition to take photos of to set expectations. If you're okay with the one in the pictures (BE SURE TO ENLARGE EACH PICTURE AND LOOK CAREFULLY) you should be happy with the condition of the post you receive. As always, if you want NEW, buy NEW, not NOS.